Clock A/C Heater Control
Panel Illumination
To remove the panel you first need to
remove the ski slope.
Once the ski slope is removed and the
control panel assembly is out remove the three screws that secure it to the
surround (top and one each side).
Remove the two screws in either side of
the case that fixes the two halves together.
Press the upper locking tangs inward
whilst pulling gently on the rear of the casing to separate the two halves.
Now remove the insulator screen from
within the front half of the case.
To remove lamps, insert a screwdriver
into the slotted base of the lamp holders and gently twist anti-clockwise to
remove. The lamp layout is shown below:
0 comments:
Post a Comment
We would love to hear your comments.